Switch Adapted Kid Connection Spinning Light Wand

The switch-adapted Spinning Light Wand is a toy that can be controlled with an accessible switch that has a 3.5 mm jack.

The Spinning Light Wand stands in a 3D printed base. This toy can be adapted in two different ways, either by using a mono jack or a battery interrupter. For the mono jack adaption, there are two versions of this base available for request: v1.0, and v1.1. Please specify to the maker which version you would like.

This device is part of our collection of adapted toys. This means the toys are made more accessible by adding assistive switch inputs.

Connect an assistive switch with a 3.5 mm mono plug to the 3.5 mm mono jack located on the base of the adapted toy. When the assistive switch is activated, the lights will turn on and spin within the plastic globe.

This adapted toy may be suitable for individuals with physical or developmental disabilities who are unable to activate small buttons on standard toys. It supports users who rely on one assistive switch due to limited fine motor control, strength, or coordination.

Switch-adapted toys can promote independent play, cause-and-effect learning, and accessible engagement for children and adults who use switch-based access methods.

To switch-adapt this toy, you must be able to solder, 3D print, and use a screwdriver. If you switch adapt the toy without a battery interrupter, you will also need to be able to cut and strip wires.

Switch adapting this toy will involve 3D printing a base, and either assembling and installing a battery interrupter, or opening the toy and soldering a mono jack in parallel with the original switch.

Detailed step-by-step instructions are available at the Project Link or via the Download Link (requires log-in).

Print Settings (All versions)

• 0.2 mm layer height
• 20% infill
• No Supports

CERN Open Hardware License - Weakly Reciprocal (OHL-W)