Interact Switch

The Interact Switch is a 3D printable switch design with an activation area of 63 mm / 2.5 in diameter . The tactile feel of the switch is on par with commercial switches, coming in at about 35 g of activation force across the surface of the switch.

There is a wide array of different switch topper designs: from a simple flat button, to textured designs, to a dome, and even a wobble switch variant. These can be printed in different colors or combinations of colours.

The switch base incorporates 6 slots that are ideal for a variety of mounting options, including using hook and loop straps (e.g., VELCRO). The base has the same footprint as a Jellybean switch, and should work with any Jellybean switch mounts. It can also be mounted using the 3 Inch AT Switch Camera Mount or the Open Universal Mounting Plate.

The Interact Switch can be connected to any 3.5mm switch-compatible assistive device, such as the Xbox Adaptive Controller. Press the switch to activate the device. Since the device has the same footprint as a Jellybean switch, it is compatible with any Jellybean switch mounts. It can be placed on a flat surface, bolted in place, or secured with hook and loop (i.e., Velcro) straps.

The device is intended for users who have difficulty using small buttons or switches, and need an accessible switch to operate them. This switch comes with different topper designs that can be 3D printed in contrasting colors which can be helpful to users with low vision.

The build involves beginner level 3D printing and soldering.

Assembly of the Interact Switch consists of some soldering, and assembling some 3D printed parts.

Print Settings:

• 0.2mm layer height (except the Switch Insert, printed at 0.1mm layer height)
• 20% Infill
• No Supports

Creative Commons Attribution 4.0 International